Model 102 - 2" Travel

Movements: X - Y  planes

Overall size (including micrometer heads): 11-3/4" L x 11-1/4" W x 2-9/16" H

Size of Mounting Slide: 4" W x 5" L

Click on photo for full size version

View Detail Drawing (print full size drawings in Landscape Mode - 600dpi) (click on browser's back button to return here)

Model 102 Specifications (shown in Right hand mounting)
This model will produce movements in the X-Y planes. Each slide has 2 inches travel.

Various micrometer heads are available for this unit. The standard size micrometer heads can be graduated with .001 inch graduations or .01 mm graduations. Large barrel micrometer heads are available with .0001 inch graduations or .002 mm graduations.

Dimensions of the mounting slide are 4 inches wide by 5 inches long. The mounting slide has twelve #10-32 tapped holes. The base has four drilled and counterbored holes for fastening.

The castings are of high strength aluminum and finished with light gray enamel. The ball races and slides are hardened tool steel.  This unit will carry 25 pounds.

Model 102 can be furnished in Right or Left Hand mounting. Model 102  weighs 10 pounds 4 ounces.

 

Model 103 - 2" Travel

Movements: Single Horizontal Movement

Overall size (including micrometer heads): 10-5/16" L x 6" W x 1-13/32" H

Size of Mounting Slide: 4" W x 5" L

Click on photo for full size version

View Detail Drawing (print full size drawings in Landscape Mode - 600dpi) (click on browser's back button to return here)

Model 103 Specifications (shown with standard size micrometer head)
This model will produce one movement in a horizontal plane. Travel of the mounting slide is 2 inches. Dimensions of the mounting slide are 4 inches wide by 5 inches long. The mounting slide has twelve #10-32 tapped holes. There are four drilled and counterbored holes in the base.

Various micrometer heads are available for this unit. The standard size micrometer heads can be graduated with .001 inch graduations or .01 mm graduations. Large barrel micrometer heads are available with .0001 inch graduations or .002 mm graduations.

The castings are of high strength aluminum and finished with light gray enamel. The slide and ball races are hardened tool steel. This unit will carry 30 pounds.

Model 103 with weighs 5 pounds 7 ounces.

 

Model 104 - 2" Travel

Movements: Single Horizontal Movement

Overall size (including micrometer heads): 11" L x 5" W x 1-5/32" H

Size of Mounting Slide: 4" W x 5" L

Click on photo for full size version

View Detail Drawing (print full size drawings in Landscape Mode - 600dpi) (click on browser's back button to return here)

Model 104 Specifications
This model will produce one movement in a horizontal plane. Travel of the mounting slide is 2 inches. Dimensions of the mounting slide are 4 inches wide by 5 inches long. The mounting slide has twelve #10-32 tapped holes. There are four drilled and counterbored holes in the base. This unit can be fastened from the top without disassembling. The mounting slide is moved to its extreme travel in either direction to expose the counterbored holes.

Various micrometer heads are available for this unit. The standard size micrometer heads can be graduated with .001 inch graduations or .01 mm graduations. Large barrel micrometer heads are available with .0001 inch graduations or .002 mm graduations.

The castings are of high strength aluminum and finished with light gray enamel. The slide and ball races are hardened tool steel. This unit will carry 30 pounds.

Model 104 with weighs 4 pounds 13 ounces.

 

Model 109

Movements: Rotary Movement 360 degree rotation in 5' graduations 1 turn of adjusting knob turns platen 6 degrees

Platen diameter: 2-3/8"

Overall size: 2-3/8" W x 3-3/16" L x 1-3/8" H

Click on photo for full size version

View Detail Drawing (print full size drawings in Landscape Mode - 600dpi) (click on browser's back button to return here)

Model 109 Specifications
This model will produce 360 degree rotation. The platen is steel and nickel plated. The body is made of aluminum.

One turn of the adjusting knob will turn the platen 6 degrees. The adjusting knob is graduated in 5 minute graduations. The worm that drives the platen is spring loaded against the worm gear to eliminate as much backlash as possible. The platen can be locked in place by a thumbscrew. Model 109 weighs 1 pound 6 ounces.

There are four #6-32 tapped holes in the top of the platen for fastening objects to it.

 

Model 110 - 1/2" Travel

Movements: X - Y  planes Rotary Movement 360 degree rotation in 5' graduations 1 turn of adjusting knob turns platen 6 degrees

Overall size (including micrometer heads): 5-1/2" L x 5-1/16" W x 2-11/16" H

Size of Mounting Slide: 2-3/8" L x 1-3/4" W

Click on photo for full size version

View Detail Drawing (print full size drawings in Landscape Mode - 600dpi) (click on browser's back button to return here)

Model 110 Specifications
This model will produce movements in the X-Y planes and 360 degree rotation. Each slide travels 1/2 inch. One turn of the rotary adjusting knob will rotate the platen 6 degrees. The adjusting knob is graduated with 5 minute graduations. The platen can be locked in place with a thumbscrew.

The rotary platen is steel and the body is made of aluminum. The slides and ball races are hardened tool steel and roll on hardened steel balls. 

Model 110 with weighs 3 pounds 6 ounces.

Micrometer heads with .001 inch or .01 mm graduations are available for this unit.

 

Model 111 - 1/4" Travel

Movements: X - Y Planes

Overall size (including fine pitch thumbscrews): 2-1/8" L x 1-7/8" W x 23/32" H

Size of Mounting Slide: 15/32" W x 1" L

Click on photo for full size version

View Detail Drawing (print full size drawings in Landscape Mode - 600dpi) (click on browser's back button to return here)

Model 111 Specifications (shown with Right Hand mounting)
This model will produce movements in the X-Y planes. Due to the small size of this model, micrometers could not be installed on it. We have installed fine pitch thumbscrews.

Like the larger models, the slides and ball races are hardened tool steel and are spring loaded against the thumbscrews. The thumbscrews have 40 pitch threads and can be supplied with 80 pitch threads on request. Model 111 weighs 5 ounces. 

The mounting slide has two #4-40 tapped holes. The body of this model is finished with light gray enamel.

 

Model 112 - 1/4" Travel

Movements: X - Y - Z Planes

Overall size (including fine pitch thumbscrews): 2-1/4" L x 1-7/8" W x 2-13/16" H

Size of Mounting Slide: 15/32" W x 1" H

Click on photo for full size version

View Detail Drawing (print full size drawings in Landscape Mode - 600dpi) (click on browser's back button to return here)

Model 112 Specifications (shown with Right Hand mounting, Left Hand mounting available)
This model will produce movements in the X-Y-Z planes. Each slide has 1/4 inch travel. Due to the small size of this model, micrometers could not be installed on it. We have installed fine pitch thumbscrews.

Like the larger models, the slides and ball races are hardened tool steel and are spring loaded against the thumbscrews. The thumbscrews have 40 pitch threads and can be supplied with 80 pitch threads on request. Model 112 weighs 9 ounces and will carry 4 ounces. 

The mounting slide has two #4-40 tapped holes. The body of this model is finished with light gray enamel.

 

Model 120 - 1/2" Travel - Partial Rotary

Movements: X - Y Planes and 20 degree total rotary travel

Overall size (including micrometer head): 5-1/4" L x 5-1/16" W x 1-27/32" H

Platen Diameter: 1-3/4"

Click on photo for full size version

View Detail Drawing (print full size drawings in Landscape Mode - 600dpi) (click on browser's back button to return here)

Model 120 Specifications
This model will produce movements in the X-Y planes and a partial rotary movement. The travel of the slides is 1/2 inch. The movement of the rotary platen is plus or minus 10 degrees for a total of 20 degrees travel. The rotary platen has four #6-32 tapped holes. The rotary platen is also available with a vacuum port. If the vacuum port is preferred, specify model 120V. View detail drawing for more details.

The X and Y slides are micrometer fed and the rotary platen is moved by turning the adjusting knob. The rotary movement is not calibrated. Micrometer heads with .001 inch graduations or .01 mm graduations are available for this unit. Model 120 weighs 2 pounds 9 ounces.

 

Model 128 - 1/2" Travel - Partial Rotary

Movements: X - Y planes and 20 degree total rotary travel

1/2" Hole through the unit Overall size (including micrometer heads): 5-1/16" L x 4-7/8" W x 1-19/32" H

Platen Diameter: 1-3/4"

Click on photo for full size version

View Detail Drawing (print full size drawings in Landscape Mode - 600dpi) (click on browser's back button to return here)

Model 128 Specifications
This model will produce movements in the X-Y planes and a partial rotary movement. The travel of the slides is 1/2 inch. We can supply micrometer heads with .001 inch graduations or with .01 mm graduations.

The movement of the rotary platen is plus or minus 10 degrees for a total of 20 degrees of travel. The rotary motion is not calibrated. The platen has a 1/2 inch diameter hole through it, which extends through the entire unit. The rotary platen has four #4-40 tapped holes in it.

The rotary motion is achieved by using a 40 pitch screw, which rotates the platen. One turn of the 40 pitch screw moves the platen 2-1/2 degrees.

For fastening, the lower slide is moved to one end of the travel to expose 2 counterbored holes and then moved to the other end of the travel to expose the other 2 counterbored holes. Model 128 weighs 2 pounds 7 ounces.